Adding switches P&K to Multiplex Royal Evo RC transmitter.
This post will show howto step by step instruction on how to add the two-way switches P and K to Multiplex Royal EVO type RC transmitter series.
- 2 SPDT short lever toggle switches.
- Different color hookup wire.
- Heatshrink to suit.
- Soldering Iron.
- Small side cutters.
- Needle nose pliers.
- Helping hand stand.
Prepare the wire and heatshrink
Solder wires to switch and place heatshrink over solder joints.
Remove the back cover of the TX to expose the two switch banks.
Using the torx tool provided in the cover, remove the switch banks carefully.
Insert the switches into the 2 switch banks.
Remove the plastic socket cover from the plug as below.
Solder the wires onto the exposed pins.
Cover solder joints with heatshrink.
Re-install the switch banks
Switch banks re-installed with switches P&K ready for action!!!
DISCLAIMER: Neither myself or Two Oceans Slope Soarers take any responsibility for the owner making the modification to the equipment and causing failure of said equipment.